Plumbing companies in Ghana: Are you looking for a professional and skilled plumber to work on your project, then look no further Waterworld technology is here to help your plumbing work both Domestic, Commercial, and Industrial service. However, our clients are extremely satisfied with this service General plumbing in Ghana
That is to say, as one of the best leading Plumbing companies in Ghana providing excellent services, we pride ourselves on the delivery of prime quality plumbing service and a 100% guarantee of job satisfaction. Are you looking for a professional company offering General plumbing in Ghana?
Pipe laying and fitting for new buildings
Downpipe (rainwater gutter) installation
Washing machine, dishwasher, and water heater installation General plumbing in Ghana
Sanitary features installation (E.g. WC, shower, bathtub, sink, etc.)
Overhead and underground water tank reservoir installation
Construction and repair of drainage and sewage systems
Irrigation systems and garden sprinkler installation
Small sewage plank (manhole) construction General plumbing in Ghana
INTRODUCTION OF PLUMBING (Plumbing companies in Ghana)
Plumbing may be defined as the practice, materials, and fixtures used in installing, maintaining, and altering piping, fixtures, appliances, and appurtenances in connection with sanitary or storm drainage facilities, a venting system, and public or private water supply systems. A plumbing system consists of three parts: an adequate potable water supply system; a safe, adequate drainage system; and ample fixtures and equipment.
NB; Plumbing does not include drilling water wells; installing water softening equipment; or manufacturing or selling plumbing fixtures, appliances, equipment, or hardware.
It is, therefore, very important that the housing inspector be completely familiar with all elements of these systems so that inadequacies of the structure’s plumbing and other code violations will be recognized.
Water Service
The piping of a house service line should be as short as possible. Elbows and bends should be kept to a minimum because they reduce water pressure and, therefore, the supply of water to fixtures in the house. The house service line also should be protected from freezing. Four feet of soil is a commonly accepted depth to bury the line to prevent freezing. This depth varies, however, across the country from north to south. The local or state plumbing code should be consulted for recommended depths. The minimum service line size should be ¾ inch. The minimum water supply pressure should be 40 pounds per square inch (psi), no cement or concrete joints should be allowed, no glue joints between different types of plastic should be allowed, and no female threaded PVC fittings should be used.
Hot and Cold Water Main Lines
The hot and cold water main lines are usually hung from the basement ceiling or in the crawl space of the home and are attached to the water meter and hot water tank on one side and the fixture supply risers on the other. These pipes should be installed neatly and should be supported by pipe hangers or straps of sufficient strength and number to prevent sagging. Older homes that have a copper pipe with soldered pipes can pose a lead poisoning risk, particularly to children. In 1986, Congress banned lead solder containing greater than 0.2% lead and restricted the lead content of faucets, pipes, and other plumbing materials to no more than 8%. The water should be tested to determine the presence or level of lead in the water. Until such tests can be conducted, the water should be run for about 2 minutes in the morning to flush any such material from the line. Hot and cold water lines should be approximately 6 inches apart unless the hot water line is insulated.
Contact Waterworld Technology for your Perfect Plumbing Work
Call us at +233240335653 To schedule services from one of our courteous plumbers online
