How to Remodel a Bathroom

Bathroom Renovation

How to Remodel a Bathroom


How to Remodel a Bathroom; Whether you’re adding a powder room or creating a serene master retreat, remodeling a bath is no small job. It pays to think about what you want a renovation to accomplish long before demo starts, and that begins with asking some basic questions. Think about what you’re looking to get out of the renovation, and who will be using the space. Ask yourself if your current layout facilitates getting ready in the morning or hinders it, and how a new space could improve your daily routine.

Also, consider if you’ll be moving in a few years or staying put. If you plan to sell in the near future, you may want to limit your remodel to a cosmetic update, but if you’re going to remain in the house for the long haul, you might want to incorporate universal design upgrades that will make your bath more comfortable and accessible as you age. And don’t forget to gather inspiration for your new bath; look at images on websites and in-home design magazines to get an idea of what layouts and styles appeal to you.

Planning Your Bathroom Renovation

Before you can begin your DIY bathroom renovation, you will need to plan it out as thoroughly as possible. The more work you do at the planning stage, the easier it will be to carry out your plans once you move on to the next step.

Choosing Design

The design of your bathroom renovation is one of the most important elements of the project. The design you choose for your renovation should be based on your personal preferences, what aesthetic and design elements you think will look best in the space, and the budget

The Cost: Consider Your Budget (How to Remodel a Bathroom)

Once you’ve narrowed the scope of the work, set your budget. Arriving at that number depends on how much you’re replacing and who is doing the work. Leaving the existing plumbing fixtures in place will keep expenses down, whereas a full overhaul could easily drive up costs. Remember, labor can run from one-third to half of your allotted budget, so it pays to tackle manageable tasks yourself, such as light demo or painting.

And leave a cushion: Bathrooms, in particular, can harbor surprises, especially when you’re removing walls and dealing with old plumbing—it’s not uncommon to take out a tub and find rotted framing and deteriorated joists from years of water damage. Set aside 10 percent of your overall costs for setbacks and change orders.

Step One: Remove fixtures first

If you’re doing a complete bathroom renovation, you will want to start with removing any fixtures that are going to be replaced during the process. This will allow you to start the room with an open, clean slate; in addition to this, removing fixtures will free up the rest of the room for cleaning, repairing and installing new fixtures and materials into the bathroom.

Ideally, begin with draining and then removing the toilet so that you will avoid unnecessary water spills or issues with the plumbing; then, if applicable, remove the bath tile before removing the bathtub itself. The last fixtures to remove are cabinets, vanities, mirrors, wall tiles and floor tiles. If you are installing new floor tiles and other fixtures, make sure that you have them nearby for easy access.

Step Two: Install floor tiles

If you are replacing the floor tiles in your bathroom, now is the time to put them down. Make sure that you use a chalk line to create reference lines so that your tiles will be straight, as otherwise, you might end up with something every DIY bathroom renovator dreads: uneven floor tiles. Don’t forget to grout in between the floor tiles.

Step Three: Place new drywall and paint

Your new drywall should be in place before you begin painting; make sure that you cover seams and gaps with drywall mud and tape so that you have a flat, even surface to work with before painting. If you are painting in the bathroom, you’ll want to pick up a paint that has a moisture-resistant finish in order to help prevent mold and mildew growth in the bathroom

Step Four: Install new plumbing fixtures

Once all of the old fixtures are gone, you can install the new fixtures, such as the bathtub, shower, or sink. Do not install the toilet during this step–save it for last. You may need to adjust the wiring in the bathroom depending on the dimensions of the new fixtures–for instance, your new vanity might be tall enough to cover up your electrical sockets, which means your sockets need to be moved; in this case, call in an electrician to work with your home’s wiring to avoid any unpleasant electrical accidents.

Finishing Up Your DIY Bathroom Renovation

Once you have your renovated bathroom looking like–well, a bathroom!–you can work on those all-important finishing touches. Finishing touches include installing trim around the mirrors or the rest of the room, adding back in your decorative touches such as hanging pictures and plants, installing window curtains if you have a bathroom window, and otherwise making your newly renovated bathroom look its very best.

Contact Waterworld Technology for help no How to Remodel a Bathroom

Waterworld Technology (WWT) is here to help! We’ll carefully. Gives you the Best Tips on How to Remodel a Bathroom Call us at +233240335653 To schedule services from one of our courteous plumbers online.

Services We Undertake

WaterWorld Technology is an Accra-base company that provides top-notch service;
General Plumbing Services
Tiling Services
Exterior and Interior Painting Service
Graffiato Paint Work
Bio File
Bio-Gas Services
P.O.P and Plasterboard installing
Water Treatment ( Reverse Osmosis System installing )
Contact us directly at (+233) 0240335653
Regardless of the size of your home, maintaining it can be a battle. While you may not have the time or the tools to complete everything on your to-do list, what you do have is a local Waterworld Technology with a trustworthy team of experts who offer handyman services with a Done Right Promise.