Graffiato Painting in Ghana is presented as a smooth paste. It consists of acrylic resins that are manufactured based on water as well as pigments resistant to UV rays. It is a painting dedicated to outer wall decoration in general. It is used for the protection and decoration of facades as well as for renovations. The GRAFFIATO
product is generally used for homes, hotels, buildings … etc.
THE REASON WHY YOU SHOULD USE GRAFFIATO: Graffiato Painting in Ghana Accra
With our expert from Togo, we have got your Grafiato Needs Covered. Call us today for your next Grafiato Project.
WHERE TO USE WWT GRAFFIATO PAINT.
Acrylic resin-based, scratch-effect wall plaster in paste
form for internal and external applications, available in various grain sizes.
Used to decorate and offer good protection to walls,
and to even out surface imperfections. It May be used to protect and decorate any kind of building, including those which are already painted
Some application examples
• Decorating all types of cementitious or lime-based render.
• Walls smoothed over with all smoothing products from the MAPEI range.
• Decorating old, well-bonded paintwork (apply a test layer beforehand).
• Decorating concrete walls,
Preparation of the product
WWT Graffiato is supplied ready to use and just needs to be thoroughly mixed with a drill at low speed, if necessary, may be diluted with 1-2% of water if the product is too viscous.
WWT Graffiato gives the substrate an attractive scratch-effect finish. It is available in colors from the “Colour Choice” color chart and a wide range of colors obtained using the ColorMap® automatic coloring
system.
APPLICATION PROCEDURE
New surfaces or surfaces patched up with repair mortar must be cured, perfectly clean, flat, and dry.
Remove all traces of oil grease and loose parts from the surface.
Seal any cracks which are present and repair any deteriorated areas.
Seal porosity and level off uneven areas on the substrate with mortar and smoothing compound from the MAPEI Building products range
Application of the product
Apply WWT Graffiato with a stainless steel or plastic trowel on the dry coat of Malech. The protection cycle includes the application of a coat of WWT Graffiato. Depending on the grain size of the WWT Graffiato and the roughness of the substrate, two coats may be applied to obtain a perfectly even finish. A smoothing coat may be applied followed by a second coat after 24 hours. Both coats must be applied evenly, and must then be smoothed over with a plastic float to even out the surface and to get the final pattern required.
SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION
WWT Graffiato is not considered hazardous according to current standards and regulations regarding the classification of mixtures. However, the use of protective gloves and goggles and the application of the usual precautions taken when handling chemical products are suggested. If the product is applied in a closed area, make sure that it is well ventilated
Regardless of the size of your home, maintaining it can be a battle. While you may not have the time or the tools to complete everything on your to-do list, what you do have is a local Waterworld Technology with a trustworthy team of experts who offer handyman services with a Done Right Promise.
